Find an installer to upgrade radiators for a heat pump in Edinburgh
A heat loss check often finds that only some rooms need new emitters, not every radiator in the house. List which rooms are slow to warm.
Describe your job in Edinburgh, and up to four independent heat pump businesses may respond, depending on the type of job and where each business operates. Matching costs nothing, and every quote can be declined.
What heat pump radiator upgrades involve
A heat pump may run at around 35 to 55°C, depending on the design. Radiator output falls at lower water temperatures; the amount depends on the radiator, room temperature and flow and return temperatures. Upgrades replace or add emitters so each room can reach temperature at that lower flow temperature. Work can include larger or double-panel radiators, fan-assisted units, bigger pipework and balancing.
What installers ask about first
- Small radiators under big windows
- Microbore or undersized pipes to some radiators
- A heat loss report listing rooms that fall short
- A room that already struggles in winter
- Wall space that is too tight for a bigger radiator
How installers usually tackle it
The list of radiators to swap should be agreed before anything is ordered. A typical job includes:
- Draining the heating system, or isolating the circuit, ready for the radiators to be changed.
- Taking off the old radiators, brackets and valves, and protecting floors and walls.
- Fitting the new radiators on brackets, with new valves and thermostatic heads.
- Replacing any undersized pipework to the larger radiators, then refilling and bleeding the system.
- Balancing every radiator at the lower flow temperature and checking the rooms reach their targets.
Larger panels, fan-assisted radiators or underfloor heating
A double-panel radiator with fins gives more output from the same wall space than a single-panel one. Fan-assisted radiators use a quiet fan to boost output from a compact unit. Underfloor heating spreads low-temperature heat across the whole floor but is more disruptive to fit. The best choice depends on the room.
What to agree before work starts
Clear furniture away from the radiators that will change. Ask who protects floors, who removes the old radiators, who fills the wall marks left by old brackets and how long the heating will be off while pipework is altered.
Water quality and balancing
Ask whether the existing circuit needs cleaning before the new radiators are connected. Treatment must suit the heat pump manufacturer’s requirements. The radiator schedule should record outputs at the proposed design temperatures, not just catalogue ratings.
The cost of heat pump radiator upgrades in Edinburgh
Expect something in the region of £1,000–£5,000. Each business sets its own prices. Swapping two or three radiators for larger like-for-like fittings sits at the lower end. Replacing most radiators in a medium house, with some new pipework, is in the middle. Whole-house replacement, fan-assisted units, solid floors and replacement pipework take the price to the top of the range or beyond.
Check whether the written price includes equipment, labour, survey charges and VAT. Allow 1–4 days as a guide for the work itself; equipment lead times and awkward access can add to it.
Before you send the form
List the rooms that stay cool, the size of the radiators in them and how many radiators the house has. If a heat pump quote or heat loss report mentions required radiator outputs, give it to every installer you ask.
Check exactly what the price covers. Ask for a radiator schedule showing the size, type and rated output of each new radiator at the heat pump’s flow temperature. Check the price covers new valves, pipework changes, balancing and making good the walls.
Rules that apply to the work
Replacing radiators like for like needs no planning permission and is not usually notifiable, but changes to pipework and the heating system as part of a heat pump installation may be covered by the installer’s competent person scheme. In a flat, check your lease before floors above shared ceilings are lifted.
Council questions for this area can go to The City of Edinburgh Council. Ask your installer which consents they will deal with and which are left to you.
Getting a business to Edinburgh
Businesses covering Edinburgh, City of Edinburgh need the full postcode. Tell them about permit parking or a tight drive. Photographs of the radiators and the pipes behind them help an installer judge the work. The existing heating matters as much as the postcode, so describe your own system.
Heat pump enquiries around Edinburgh
An enquiry for a neighbouring town should include that property’s address. Cover can change from one side of a town to the other.
Leith, Newington, Morningside, Corstorphine, Portobello, Bonnyrigg, LoanheadReady to ask for prices?
Use the free enquiry form to describe the job. Send any heat loss report you hold, so each business prices the same list of radiators. Businesses that join are asked for insurance details and references. Before booking, ask to see current insurance and the qualifications needed for the quoted work. We only pass the enquiry on: advice, pricing and the work itself come from the business you pick.
What to check before arranging this service
How can I compare quotes for heat pump radiator upgrade in Edinburgh?
Fill in one enquiry form with your postcode, the rooms that stay cold and the size of the radiators in them. It can reach up to four independent heat pump businesses working in Edinburgh. Replies depend on the job and availability. You decide whether to book anyone.
Roughly how much is heat pump radiator upgrade in Edinburgh?
We use £1,000–£5,000 as a UK guide. Businesses in Edinburgh price their own work, and the number of radiators, their size and any pipework changes affect the total. A written quote should list equipment, labour, VAT and any survey or call-out charge.
Do I need bigger radiators with a heat pump?
Often, but not always. Radiators give less heat at lower flow temperatures, so rooms with small radiators may fall short. A room-by-room heat loss check shows which ones need changing.
Can I keep my existing pipework?
Sometimes. Larger radiators need more water flow, and undersized or microbore pipes can restrict them. The installer should check the pipe sizes before quoting.
Are fan-assisted radiators noisy?
Quiet models run at low speed, but they are not silent, so avoid fitting them in a bedroom without hearing one first. Ask the installer for the sound level at the speed they expect to use.
How long should I allow for heat pump radiator upgrade?
Allow 1–4 days as a guide. Ask for a radiator schedule listing the rated output of each new radiator. Equipment deliveries, pipework changes and electrical work can add time. Agree how long heating or hot water will be unavailable.