Find an installer for an air-to-air heat pump in Pollokshields
Some owners want one system that heats in winter and cools in summer, without radiators or a hot water cylinder. Note which walls the outdoor unit could sit against.
Describe your job in Pollokshields, and up to four independent heat pump businesses may respond, depending on the type of job and where each business operates. Matching costs nothing, and every quote can be declined.
What air-to-air heat pump installation involves
An air-to-air heat pump moves heat between the outside air and the room air directly, using refrigerant pipes between an outdoor unit and one or more indoor units. There are no radiators or water pipes in the system, and it does not heat a hot water cylinder, so the quote should cover heating the rooms only.
What installers ask about first
- A room that is hard to reach with the main heating
- Plug-in heaters running through the winter
- A wish to cool bedrooms in summer
- No room for a plant cupboard or tank
- Interest in a multi-room system from one outdoor unit
How installers usually tackle it
Positions for both units are fixed before anything is cut. A typical job includes:
- Fitting the indoor unit brackets and the outdoor unit feet or wall bracket.
- Drilling a small core hole through the wall for the refrigerant and condensate lines.
- Routing insulated refrigerant pipes, the condensate drain and the power cable between the units.
- Pressure-testing the pipework with nitrogen, then evacuating it before the refrigerant is released.
- Setting up the system, checking airflow, temperatures and the remote or app controls with you.
Single split or multi-split
A single split pairs one outdoor unit with one indoor unit. A multi-split connects several indoor units to one outdoor unit, which saves wall space but means each room shares the outdoor unit’s capacity. Ask the installer to explain what happens when every room calls for heat at once.
What to agree before work starts
Clear the wall where the indoor unit will hang and the ground below where the outdoor unit will sit. Ask where the condensate will drain, who makes good the core hole and trunking, and whether the outdoor unit needs a base or wall bracket.
Pipe routes and condensate
Have the installer show you the condensate route before drilling. A gravity drain and a pumped drain have different maintenance needs. Check who seals the wall penetrations and whether visible trunking is included.
The cost of air-to-air heat pump installation in Pollokshields
Expect something in the region of £1,500–£5,000. Each business sets its own prices. A single split heating one room sits at the lower end. A two or three room multi-split with longer pipe runs is in the middle. Ducted systems, multiple outdoor units or long routes through finished walls take the price to the top of the range or beyond.
Check whether the written price includes equipment, labour, survey charges and VAT. Allow 1–3 days as a guide for the work itself; equipment lead times and awkward access can add to it.
Before you send the form
Say which rooms you want heated or cooled and roughly how large each is. Describe the walls the pipes would pass through and where an outdoor unit could stand without blocking a path or a window.
Check exactly what the price covers. Ask which brand and model is quoted for each room, the rated heating output of each indoor unit, the pipe length allowed for in the price and whether the electrical supply to the outdoor unit is included.
Rules that apply to the work
Many air-to-air installations are treated like air conditioning units, but outdoor unit position, noise and the building type can matter. Listed buildings, conservation areas and flats with leases are the usual sticking points, so ask before ordering. Installers working with fluorinated refrigerants need the relevant F-gas qualifications and company certification where required. Grant eligibility depends on the property, system and scheme rules. Check the current Boiler Upgrade Scheme guidance for England and Wales, including eligible air-to-air systems, and confirm installer certification and application arrangements before ordering. Scotland and Northern Ireland have different support arrangements.
If you are not sure whether the council needs to know, ask Glasgow City Council. If the job grows beyond what was quoted, confirm which approvals apply before the extra work starts.
Getting a business to Pollokshields
Give the full postcode for the property in Pollokshields, Glasgow City. Tell them about permit parking or a tight drive. Photographs of the room and the outside wall behind it help an installer plan the pipe route. The existing heating matters as much as the postcode, so describe your own system.
Heat pump enquiries around Pollokshields
An enquiry for a neighbouring town should include that property’s address. Cover can change from one side of a town to the other.
Shawlands, Giffnock, Govan, Dennistoun, Johnstone, Dumbarton, BishoptonReady to ask for prices?
Use the free enquiry form to describe the job. Say whether you want cooling as well as heating, and name any room where noise matters more than speed of warming. Businesses that join are asked for insurance details and references. Before booking, ask to see current insurance and the qualifications needed for the quoted work. We only pass the enquiry on: advice, pricing and the work itself come from the business you pick.
What to check before arranging this service
How can I compare quotes for air-to-air heat pump installation in Pollokshields?
Fill in one enquiry form with your postcode, the rooms to be heated and the walls the pipes would cross. It can reach up to four independent heat pump businesses working in Pollokshields. Replies depend on the job and availability. You decide whether to book anyone.
Roughly how much is air-to-air heat pump installation in Pollokshields?
We use £1,500–£5,000 as a UK guide. Businesses in Pollokshields price their own work, and the number of indoor units, pipe length and wall construction affect the total. A written quote should list equipment, labour, VAT and any survey or call-out charge.
Does an air-to-air heat pump heat hot water?
The room-heating split systems described here heat and cool air, so you normally need a separate hot water arrangement. If a supplier proposes an integrated hot water option, ask exactly what equipment the quote includes.
Can one outdoor unit serve several rooms?
Yes, with a multi-split system. Each room has its own indoor unit, but they share one outdoor unit, so ask how the capacity is shared when several rooms call for heat.
Where should the outdoor unit go?
On a firm base or bracket with clear airflow, away from bedroom windows and shared boundaries where noise could cause trouble. The installer should explain the position they propose.
How long should I allow for air-to-air heat pump installation?
Allow 1–3 days as a guide. Ask for the quote to name every indoor unit, its output and where the pipes run. Equipment deliveries, pipework changes and electrical work can add time. Agree how long heating or hot water will be unavailable.